How about a siphon scraper discharge centrifuge?

Material: The part in contact with the material can be ordinary stainless steel, special stainless steel, carbon steel, plastic lining, titanium alloy, etc.

Drive methods: electromagnetic speed regulation motor drive, frequency conversion drive for ordinary motors or explosion-proof motors, etc.

Braking method: mechanical braking or electric braking, etc.

Machine cover form: closed large flip cover, etc.

Opening method: hydraulic, pneumatic, electric or mechanical balancer, etc

Base form: The SD series has a foundation or no foundation, while the LD series has no foundation.

Electric control methods: semi-automatic, fully automatic, or PLC program control, etc.

The suspension enters the high-speed rotating drum through the feeding valve, and the feeding process is controlled by a time or material controller until the drum is allowed to be fully filled. During the feeding process, the filtration of the mother liquor begins simultaneously and the infiltration of the filter cake layer has been completed. The washing solution is controlled by a time or flow valve, and is sprayed onto the filter cake through a washing tube and a spray hole to wash the filter cake after removing the mother liquor. After the filter cake layer is dried, it is cut by a lifting scraper or a rotating scraper, and then sent out of the machine through an inclined bucket or screw conveyor. These processes can be completed manually or automatically by electrical, hydraulic, or mechanical operations. 3. The main characteristics of the siphon scraper centrifuge require a concrete foundation and elastic shock absorber pads. Output filter cake through inclined bucket. The feeding form in which materials are evenly distributed within the drum. Optional systems based on different products and operating conditions: explosion-proof motors; Variable frequency motor; Inert gas protection system; Spiral conveying discharge device; Separate collection devices for filtrate and washing solution;

The main advantage of the siphon scraper centrifuge is that the fully open casing makes the entire working area easy to maintain, inspect, and clean. The smoothness of all surfaces in contact with materials is high. Through wall design separates the work area from mechanical components to ensure the cleanliness of the work environment and products. The design of the inclined bucket helps to discharge the filter cake, making it easy to clean and inspect the inclined bucket. Distribute the incoming materials evenly in the drum to ensure uniform thickness of the filter cake. The siphon scraper centrifuge has a high separation factor and a low liquid content in the filter cake. Cleaning night can be added to the drum and rotated at low speed to clean the drum. Self damping frame, with lower height requirements during installation and smaller footprint.